TallyPrime Setup Guide
How to connect TallyPrime with ERPPlugs step by step.
How it works
How to connect TallyPrime with ERPPlugs step by step.
Setting up TallyPrime with ERPPlugs requires installing a lightweight companion application that bridges TallyPrime with our cloud service.
Prerequisites
- TallyPrime Release 3.0 or later (Tally.ERP 9 also supported)
- Windows 10 or later
- Active internet connection
- Admin access to TallyPrime
Steps
- 1Download the ERPPlugs TallyPrime Bridge from your dashboard
- 2Install and run the bridge application
- 3Enter your ERPPlugs API key (found in dashboard Settings)
- 4Select the Tally company to connect
- 5The bridge will verify connectivity and display "Connected"
Troubleshooting
- Ensure TallyPrime is running before starting the bridge
- Check that ports 9000-9100 are not blocked by firewall
- Verify the company name matches exactly
Next steps
API Reference
Frequently Asked Questions
TallyPrime Release 3.0 or later is supported, and Tally.ERP 9 is also supported. The bridge needs Windows 10 or later, an active internet connection and admin access to TallyPrime.
TallyPrime runs on a local Windows machine, so ERPPlugs uses a lightweight companion application, the ERPPlugs TallyPrime Bridge, to connect it with the ERPPlugs cloud service. You download the bridge from your ERPPlugs dashboard.
Your API key is in the Settings section of your ERPPlugs dashboard. Enter it in the bridge application after installing it, then select the Tally company to connect; the bridge verifies connectivity and shows Connected.
Make sure TallyPrime is running before you start the bridge. Then check that ports 9000 to 9100 are not blocked by your firewall, and that the company name you selected matches the Tally company name exactly.