Perimattic
Free Tool

OEE Calculator

Calculate Overall Equipment Effectiveness — Availability, Performance, and Quality — and benchmark your plant against world-class standards.

Row of orange industrial robots working along an automated production line
Overview

What is OEE?

OEE (Overall Equipment Effectiveness) is the gold-standard metric for manufacturing productivity. It multiplies three factors: Availability (actual run time vs. planned time), Performance (actual throughput vs. ideal rate), and Quality (good units vs. total units). World-class OEE is 85% or higher. Most plants operate between 40–60%, meaning significant hidden capacity exists in existing equipment.

Calculator

Enter your production data

What we calculate

Run Time = Planned Production Time − Unplanned Downtime
Availability = Run Time ÷ Planned Production Time
Performance = (Ideal Cycle Time × Total Units) ÷ (Run Time × 60)
Quality = Good Units ÷ Total Units
OEE = Availability × Performance × Quality

OEE Benchmarks

World Class≥ 85%
Good60% – 84%
Average40% – 59%
Below Average< 40%

Results

Enter production data, then click “Calculate OEE”.

Formula

How does the OEE calculator work?

The calculator takes five numbers from one shift, one day or any period you choose: planned production time, unplanned downtime, the ideal cycle time for one unit, total units produced and good units produced. It then works out three ratios and multiplies them together.

Run time
Planned production time − Unplanned downtime
Availability
Run time ÷ Planned production time
Performance
(Ideal cycle time × Total units) ÷ (Run time × 60)
Quality
Good units ÷ Total units
OEE
Availability × Performance × Quality

Planned time and downtime are entered in minutes, while ideal cycle time is entered in seconds. That is why run time is multiplied by 60 in the Performance formula: it converts minutes to seconds so both sides of the ratio use the same unit. Availability captures stops, Performance captures slow running and short stops that were not logged as downtime, and Quality captures units that were not good first time.

Blue robotic arm loading parts in an automated machining cell
Worked example

OEE worked example for one shift

Take an 8-hour shift with 480 minutes of planned production time. The machine was down for 60 minutes, its ideal cycle time is 30 seconds, it made 800 units and 760 of them were good.

OEE worked example
StepResult
Run time480 − 60420 min
Availability420 ÷ 48087.5%
Performance(30 × 800) ÷ (420 × 60) = 24,000 ÷ 25,20095.2%
Quality760 ÷ 80095.0%
OEE0.875 × 0.952 × 0.9579.2%

A score of 79.2% falls in the calculator's “Good” band (60–84%). Each factor looks healthy on its own, yet together they mean roughly a fifth of planned time produced no good output. The biggest single loss here is availability: 60 minutes of downtime cost more than the slow running and the 40 rejects combined.

Reading the result

How should you read your OEE score?

The calculator labels results as World Class (85% or more), Good (60–84%), Average (40–59%) or Below Average (under 40%). The band is a starting point; the three factors tell you where to act.

  • Low Availability points to breakdowns, long changeovers or waiting for material. Start with a downtime log by reason.
  • Low Performance points to reduced speed or micro-stops. Compare actual cycle time against the ideal with the Cycle Time Calculator.
  • Low Quality points to scrap and rework. The Defect Rate Calculator puts a cost on those rejects.

Track the same machine over several shifts before drawing conclusions. One shift can be skewed by a single breakdown or a new product changeover.

Common mistakes

What are the common OEE calculation mistakes?

  • Using a padded ideal cycle time. If you enter the cycle time you usually achieve instead of the fastest design rate, Performance looks close to 100% and hides speed losses.
  • Counting planned stops as downtime. Breaks and planned maintenance belong outside planned production time, not in unplanned downtime.
  • Counting reworked units as good. Quality should count only units that were right first time.
  • Mixing units. Planned time and downtime are in minutes; ideal cycle time is in seconds. A Performance figure above 100% usually means one of these was entered in the wrong unit.
  • Averaging OEE across machines. A simple average of machine scores ignores how much each machine produced. Compare machines side by side instead.

If you need OEE for every machine and shift rather than one calculation at a time, Intellyx OEE & Production Monitoring calculates it in real time from PLC, sensor and ERP data.

FAQs

Frequently Asked Questions

What is a good OEE score?

World-class OEE is 85% or higher. An OEE of 60–85% is considered good with room for improvement. Most manufacturing plants average 40–60%. An OEE below 40% indicates significant losses in availability, performance, or quality that need immediate attention.

How is OEE calculated?

OEE = Availability × Performance × Quality. Availability = Run Time / Planned Production Time. Performance = (Ideal Cycle Time × Total Count) / Run Time. Quality = Good Count / Total Count. Each factor is a percentage, and their product gives the overall OEE percentage.

What are the Six Big Losses that OEE measures?

OEE captures six losses: (1) Equipment failure and (2) Setup/adjustment time reduce Availability. (3) Idling/minor stops and (4) Reduced speed lower Performance. (5) Process defects and (6) Reduced yield (startup rejects) hurt Quality. Improving any of these six areas directly raises OEE.

How often should OEE be measured?

Best practice is to measure OEE continuously per shift, per machine. Real-time OEE monitoring (like Intellyx provides) catches losses as they happen rather than after the fact. At minimum, measure daily per production line to establish trends and identify chronic losses.

What is the difference between OEE and TEEP?

OEE measures effectiveness against planned production time, while TEEP (Total Effective Equipment Performance) measures against all available time (24/7/365). TEEP = OEE × Utilization, where Utilization = Planned Time / Calendar Time. TEEP reveals how much total capacity exists.

Perimattic Intellyx

Want these numbers live, not once a month?

Perimattic engineers will walk through your plant and show where live OEE, quality and cost data from Intellyx would have the fastest impact, at no obligation.
  • Free consultation
  • No commitment
  • Tailored to your team