Perimattic
Preventive maintenance

Preventive maintenance schedule: how to build one

Pick the right trigger for each piece of equipment, set intervals from the manual, and lay out a year of visits your team can actually keep.

Free to useFree sign-up to see resultsRuns in your browser

Last updated 22 October 2026

Date organiser clipboard used to plan scheduled work
Overview

What is a preventive maintenance schedule?

A preventive maintenance schedule is a calendar of planned service tasks for each piece of equipment, set by time, running hours or measured condition. It lists what is checked, how often, by whom and when. Build it from the manufacturer’s manual first, then adjust for how hard the equipment works on your site.

Triggers

Which scheduling basis should you use?

Every task in a schedule needs a trigger: the thing that says “do this now”. There are three common kinds, and most sites use all three for different equipment.

BasisHow it worksSuitsWatch out for
Time-basedFixed calendar interval: monthly, quarterly, half-yearlySplit ACs, lifts, rooftop solar, most AMC visitsOver-servicing idle equipment and under-servicing busy equipment
Usage-basedRunning hours, cycles, kilometres or units producedDG sets, compressors, pumps, vehiclesNeeds a reliable hour meter or log, read at every visit
Condition-basedAct when a measured value crosses a limit: temperature, vibration, pressure, outputLarge chillers, critical motors, solar plants with monitoringNeeds instruments and someone who reviews the readings

Many manuals combine the first two: “every 250 hours or six months, whichever comes first”. Your schedule should keep both counters and raise the visit on whichever is reached earlier.

Method

How do you build a preventive maintenance schedule?

  1. List every asset. Customer, site, equipment type, make, model, serial number, installation date and, for engines, the current hour-meter reading.
  2. Read the manual. Note each maintenance task and its interval. Where the manual is missing, ask the manufacturer or its authorised service centre rather than guessing.
  3. Pick the trigger for each task from the table above, and adjust intervals for site conditions such as dust, heat, salt air or round-the-clock running.
  4. Group tasks into visits. A quarterly visit can include the monthly checks, so the technician does one trip, not three.
  5. Add statutory items separately. Inspections required by law, such as lift inspections, follow your state’s rules and are carried out by the authorities, not by your technician.
  6. Assign and remind. Each visit needs an owner, a due date and a reminder to both the technician and the customer.
  7. Review every quarter. Repeat breakdowns between visits mean the interval is too long or a task is missing.
Open monthly planner with handwritten notes on a wooden desk
Typical intervals

How often is common equipment usually serviced?

The table below is general guidance on how service businesses commonly plan these visits. It is not a substitute for the manufacturer’s manual, which always takes priority, and it does not cover statutory inspections.

EquipmentCommon planning basisTypical visit pattern in AMCsAlways check
Split and window ACsTime-basedFilter cleaning often, full service a few times a year, more often in heavy-use or dusty sitesManufacturer’s manual; site dust and running hours
LiftsTime-basedRoutine maintenance visits, commonly monthly, plus breakdown call-outsManual, your state’s lift rules and licence conditions
DG setsUsage-based with a calendar backstopOil and filter changes by running hours or time, whichever comes first; routine checks and test runs betweenEngine manual for hour intervals and oil grade
Rooftop solarTime-based plus monitoringModule cleaning set by dust and rainfall; periodic inverter, wiring and earthing checksModule and inverter manuals; generation data
Medical equipmentTime-based plus calibration due datesPreventive maintenance and calibration as set by the manufacturer; regulatory QA where it appliesManual, the hospital’s quality policy and any regulator’s rules
Example

What does a sample schedule look like for a mixed site?

Here is an illustrative annual plan for one commercial building with eight split ACs, one passenger lift, one DG set and a rooftop solar plant, all under AMC. The intervals are placeholders to show the layout; set your own from each manual.

Illustrative only. Q = quarterly service; M = monthly visit; H = by running hours.
MonthSplit ACsLiftDG setRooftop solar
AprilQ service: filters, coils, drain, gas pressureM visitMonthly check and test run; H service if dueCleaning; inverter and earthing check
MayFilter cleaningM visitMonthly check and test runCleaning
JuneFilter cleaningM visitMonthly check; H service if dueCleaning; pre-monsoon wiring check
JulyQ serviceM visitMonthly check and test runCleaning as needed
AugustFilter cleaningM visitMonthly check; H service if dueGeneration review
SeptemberFilter cleaningM visitMonthly check and test runCleaning
OctoberQ serviceM visitMonthly check; H service if dueCleaning; inverter and earthing check
NovemberFilter cleaningM visitMonthly check and test runCleaning
DecemberFilter cleaningM visitMonthly check; H service if dueCleaning
JanuaryQ serviceM visitMonthly check and test runCleaning; generation review
FebruaryFilter cleaningM visitMonthly check; H service if dueCleaning
MarchFilter cleaning; renewal surveyM visit; renewal surveyMonthly check; renewal surveyCleaning; annual report

The last month carries a renewal survey: a quick look at condition and repeat faults, which you need before quoting next year’s contract. To produce a plan like this for each contract, with dates rather than months, use the free AMC schedule generator.

Keeping to it

Why do preventive maintenance schedules slip?

CauseWhat helps
Breakdowns pull technicians off planned visitsKeep a fixed share of each day for planned work, and track how many visits were missed each month
Nobody is remindedAutomatic reminders to the technician and to the customer a few days before the visit
Customer site is locked or not readyConfirm the visit the day before; record no-access visits so they can be rebooked
Running hours are not recordedMake the hour-meter reading a required field on every DG set job card
Schedule lives in one person’s spreadsheetOne shared register of contracts and visits that the whole team can see
Perimattic

How does Perimattic Field Service Management help with schedules?

Perimattic Field Service Management is built for Indian service businesses that sell AMCs. Each contract in the AMC register generates its own preventive maintenance visits automatically, with reminders to technicians and customers, and technicians complete checklists, photos and customer signatures on a mobile app that works with patchy connectivity. Missed and completed visits show up against each contract.

Sign up to tell us how your team schedules work today.

Technician in a cap working on an outdoor electricity meter and panel
FAQs

Preventive maintenance schedules, answered

How often should preventive maintenance be done?

There is no single answer. The manufacturer’s manual sets the minimum for each piece of equipment, usually as a calendar interval, a running-hours interval or both. Heavy use, dust, heat and coastal air shorten the gap. Statutory inspections, such as for lifts, follow the rules of your state, not your schedule.

What is the difference between preventive and predictive maintenance?

Preventive maintenance happens at fixed points: every three months or every 250 running hours, whether or not anything looks wrong. Predictive or condition-based maintenance waits for a measured sign, such as vibration, temperature or a drop in output, and acts before failure. Most service businesses use a mix of both.

Can I make a preventive maintenance schedule in Excel?

Yes, and many small service businesses do. A spreadsheet works for a few contracts. It gets hard to manage once you have dozens of sites, because nobody is reminded when a visit is due and missed visits are only noticed when a customer complains. The free AMC schedule generator gives you a visit plan you can export to a calendar.

Talk to our team

Want every AMC visit, ticket and renewal tracked in one place?

Sign up to tell us how your service team works, and our team will get in touch to show you how it fits.

Sign up