Preventive maintenance checklists for AC, lift, DG and solar
Generic checklists your technicians can adapt for split ACs, lifts, DG sets and rooftop solar, and the rules for writing a checklist that gets filled in properly.
Last updated 22 October 2026
What is a preventive maintenance checklist?
A preventive maintenance checklist is the list of checks a technician completes and records at each planned visit, with a result for every line: OK, adjusted, or needs repair. A good one follows the manufacturer’s manual, fits on one screen or page, and captures readings, photos and the customer’s signature as proof of the visit.
What safety rules apply to every checklist?
Isolate power and follow lockout/tagout before opening any panel, and let only trained, qualified personnel work on electrical, refrigerant, lift or engine systems. The checklists below are generic and do not give procedures, limits or torque values. Those come from the manufacturer’s manual for the specific model, which always takes priority over anything here.
Each checklist assumes the technician records a result for every line (OK, adjusted, needs repair, not applicable), notes readings where asked, and takes a photo of anything that needs a follow-up job.
What should an AC split unit checklist include?
| Area | Check | Record |
|---|---|---|
| Indoor unit | Clean or wash air filters; check the cabinet, louvres and swing | Filter condition; photo before and after |
| Indoor coil and blower | Inspect and clean evaporator coil and blower wheel as per the manual | Coil condition |
| Drainage | Flush the drain tray and pipe; check for leaks and correct slope | Water flow OK or blocked |
| Outdoor unit | Clean condenser coil and fan; clear debris and obstructions around the unit | Coil condition; airflow clearance |
| Refrigerant circuit | Check gas pressure with gauges (qualified technician only); look for oil stains at joints | Pressure reading; leak suspected yes/no |
| Electricals | Check supply voltage, wiring, terminals, capacitor and earthing | Voltage and current readings |
| Performance | Measure air temperature at return and supply after the unit settles | Temperatures; customer comments |
| Close-out | Unit running normally, area cleaned, customer informed | Customer signature |
What does a lift technician log at a maintenance visit?
This covers only the general visual and functional checks a maintenance technician records. Statutory inspection, testing and licensing of lifts are done by inspectors authorised under your state’s lift rules; check your state’s rules and the lift manufacturer’s maintenance instructions for the full scope.
| Area | Check | Record |
|---|---|---|
| Car and landing doors | Doors open and close smoothly; door protection reverses the doors on obstruction | OK or fault noted |
| Levelling | Car stops level with each landing served | Floors with a step, if any |
| Buttons and indicators | Car and landing buttons, indicators and lighting work | Faulty items |
| Alarm and communication | Alarm bell and intercom or phone in the car work; emergency light works | Tested yes/no |
| Machine room or controller | Clean, dry, locked; no unusual noise, heat or smell | Observations |
| Ride quality | No unusual noise or vibration during travel | Observations |
| Records | Breakdown and entrapment calls since last visit reviewed | Count; follow-up jobs raised |
| Close-out | Lift returned to service; owner’s representative informed | Signature |
What should a DG set maintenance checklist include?
| Area | Check | Record |
|---|---|---|
| Running hours | Read the hour meter; compare with the next service due | Hours reading (required) |
| Lubrication | Check engine oil level and condition; change oil and filters when hours or time say so | Oil level; service done yes/no |
| Fuel system | Check fuel level, leaks, fuel filter and water separator | Fuel level; leaks |
| Cooling | Check coolant level, radiator, hoses and fan belt | Coolant level; belt condition |
| Air intake | Inspect air filter or restriction indicator | Clean, replaced or OK |
| Battery and starting | Check terminals, electrolyte or charge level, charger working | Battery voltage |
| Test run | Run the set as per the site’s routine; check gauges, alarms and changeover | Voltage, frequency, oil pressure, temperature |
| Close-out | Set left in auto or as the site requires; area clean | Signature |
What should a rooftop solar maintenance checklist include?
| Area | Check | Record |
|---|---|---|
| Modules | Clean as per the module maker’s method; look for cracks, hot spots, shading and bird droppings | Photo; damaged modules |
| Structure | Check mounting structure, fasteners, rust and roof penetrations | Observations |
| DC side | Inspect cables, connectors and junction boxes for damage or heating | Faults noted |
| Inverter | Check display, alarms and event log; clean vents | Alarm codes; generation today |
| Earthing and protection | Check earthing connections, surge protection and lightning arrester where fitted | Condition |
| Generation | Compare generation with the previous period and similar days | kWh for the period |
| Close-out | System running; customer informed of any issue | Signature |
How do you write a good maintenance checklist?
- Start from the manual. Copy the manufacturer’s tasks for that model first, then add what your site experience says is missing.
- One check per line. “Clean filter and check drain” is two lines, because one can pass while the other fails.
- Ask for evidence, not ticks. A pressure reading, an hour-meter reading or a photo is harder to fake than a tick box.
- Fixed answers. OK, adjusted, needs repair, not applicable. Free text only for notes.
- Keep it short. If it takes longer to fill than to do the work, it will be filled in at the office afterwards.
- Link failures to action. “Needs repair” should create a follow-up job, not sit in a report nobody reads.
- Version it. Date each checklist so you know which one a past visit used.
Checklists sit inside a schedule. See how to build a preventive maintenance schedule for setting intervals.
How does Perimattic Field Service Management handle checklists?
The technician mobile app in Perimattic Field Service Management includes job cards with checklists, photos and the customer’s signature, designed to work with patchy connectivity. Each completed checklist sits against the visit, the equipment and the AMC it belongs to, and spare parts used are recorded on the same job.
Sign up to share the checklists your team uses today.
Keep reading
Maintenance checklists, answered
Can I use these checklists as they are?
Use them as a starting point. They are generic and cover the checks most technicians log. Every make and model has its own tasks, intervals and limits, so add the items from the manufacturer’s manual and remove anything that does not apply before you give a checklist to your team.
Does a technician’s lift checklist replace the statutory inspection?
No. A maintenance checklist records the routine visual and functional checks a maintenance technician carries out. Statutory inspection and licensing of lifts are done by inspectors authorised under your state’s lift rules. Keep both records, because the inspector may ask to see the maintenance log.
Should checklists be on paper or on a phone?
Either works if it is filled in at the site and kept. Paper is cheap but gets lost and cannot carry photos. A phone checklist can force required fields, attach photos and time-stamp the visit, which helps when a customer disputes whether a visit happened. Pick one that works offline if signal is poor on your sites.
Want every AMC visit, ticket and renewal tracked in one place?
Sign up to tell us how your service team works, and our team will get in touch to show you how it fits.
Sign up