Free Tool
Pallet Calculator: How Many Boxes Fit on a Pallet
Enter the carton and pallet to get cartons per layer and per pallet, load height and weight, cube utilisation, and how many pallets fit in a 53 ft trailer or a shipping container.
Book a DemoHow many boxes fit on a pallet?
Divide the pallet length and width by the box length and width, rounding down, to get boxes per layer, and try the box turned 90° as well. Divide the usable stack height by the box height for layers, then multiply. A 48 × 40 in pallet takes 10 boxes of 16 × 12 in per layer using a mixed pattern.
Calculator
Enter your carton and pallet
Cartons stay upright and may turn 90° on the layer. No overhang past the pallet edge is allowed.
Method used
- Cartons per layer: the best of both carton orientations and every two-block mix of them
- Layers = (max load height − pallet height) ÷ carton height, rounded down
- Cartons per pallet = layers × cartons per layer, capped by the weight limit
- Cube utilisation = carton volume on the pallet ÷ (pallet footprint × usable height)
Results
Enter the carton and pallet, then select “Calculate pallet load”.
How to use it
Pallet loads, worked through
The calculator tries the carton both ways round and every split of the pallet into two blocks with opposite orientations, and keeps the pattern that fits the most cartons per layer. It then stacks layers up to your height limit and stops early if the weight limit is reached first.
A worked example
Cartons are 16 × 12 × 10 in and weigh 20 lb, on a 48 × 40 in pallet that is 5.5 in high and weighs 40 lb. The limits are 60 in and 2,500 lb. Laid one way, 3 × 3 = 9 cartons fit; turned, 4 × 2 = 8. A mix of two rows of 3 and one row of 4 turned cartons fits 10 and covers the whole deck.
The usable height is 60 − 5.5 = 54.5 in, so 5 layers fit, giving 50 cartons. The load is 55.5 in high and weighs 50 × 20 + 40 = 1,040 lb. An order of 1,000 cartons needs 20 pallets, which fits in one 53 ft trailer.
How to read your result
If the result says it is limited by weight, the pallet is full by weight before it is full by height, and a lower stack is the right answer. If cube utilisation is low, look at the layer diagram: gaps in the layer or a tall unused band under the limit point to a carton size that does not suit the pallet.
Common mistakes
Forgetting that the height limit includes the pallet. Using the inside size of the carton instead of the outside. Ignoring the weight the bottom layer can carry, which may cap the stack below your height limit. And assuming a high cube container takes more pallets: the floor is the same as a 40 ft standard.
What to do next
Check the class of the finished pallet with the freight class calculator, or the volume of an export load with the CBM calculator. To size the order itself, the EOQ calculator balances ordering cost against holding cost; rounding the result to full layers or full pallets often saves handling.
Reference
How many pallets fit in a trailer or container?
Typical published counts for floor-loaded pallets in a single tier. The calculator works out the floor positions for your pallet and never shows more than these counts for the standard sizes, then checks the payload and inside height.
| Pallet | Size | 53 ft dry van | 20 ft container | 40 ft container |
|---|---|---|---|---|
| GMA (North America) | 48 × 40 in | 26 straight, 30 turned | About 10 | 20 to 21 |
| EUR (EPAL) | 1200 × 800 mm | Not published | 11 | 24 to 25 |
| Industrial | 1200 × 1000 mm | Not published | 9 to 10 | 20 to 21 |
Checked on 17 November 2026. Container counts from iContainers; 53 ft trailer counts and the 42,000 to 45,000 lb cargo range from ATS. For other pallet sizes in a 53 ft van the calculator gives a geometric estimate from a typical 630 × 100 in floor. Container inside sizes and payloads are typical values; trailer and container specifications vary by unit.
Pallet patterns are only as good as the order quantities behind them. Perimattic Demand OS forecasts demand at SKU level and recommends order quantities. If you need palletising rules inside your own warehouse system, see warehouse management system development, and for stock records across locations, the ERPStack inventory module. The universal EOQ calculator and inventory turnover ratio calculator on the Perimattic tools site help size orders and check how fast palletised stock moves.
More shipping and inventory tools
CBM Calculator
Work out cubic metres, air and sea chargeable weight, and how full a 20 ft or 40 ft container would be.
Learn moreFreight Class Calculator
Turn LTL dimensions and weight into density and an estimated NMFC class on the 13-tier scale.
Learn moreInventory Turnover Calculator
Compute turnover ratio, days of supply, and compare against industry benchmarks.
Learn moreUniversal EOQ Calculator
Order quantity calculator on the Perimattic tools site, for comparing order sizes across items.
Learn moreInventory Turnover Ratio Calculator
Check how many times stock turns over a year, from the Perimattic manufacturing tools.
Learn moreWarehouse Management System Development
Custom WMS builds covering receiving, putaway, picking, palletising and dispatch.
Learn moreFrequently Asked Questions
Pallet loads, answered
How many boxes fit on a 48 x 40 pallet?+
How many pallets fit in a 53 ft trailer?+
How many pallets fit in a 20 ft and a 40 ft container?+
What is a good pallet cube utilisation?+
Should boxes overhang the pallet?+
What is the maximum height and weight for a pallet?+
Order in quantities that ship well
- Free consultation
- No commitment
- Tailored to your team